EMC計測・診断・電波暗室のご用命はトーキンEMCエンジニアリング

  • Top
  • 会社概要
  • プライバシーポリシー
  • カタログ
  • サイトマップ
  • お問い合わせ
ENGLISH
 
EMC Testing/Certification Support
> HOME >EMC Test & Support Service >Certification Support >Application Agency Service for South Korea

Application Agency Service for South Korea EMC & Safety Certification

 
Based on strong networks with South Korea, Tokin EMC provides an application service for RRL EMC registration and support to acquire certification of electrical appliance safety.

The performance and experience that Tokin EMC has so far obtained in the EMC business in South Korea enables us to acquire certification more quickly and certainly than any other agency.
Printer-friendly page
 

Documents and samples prepared for application

  1. Application form for certification of information technology equipment -MIC-
    (written in Korean or English)
  2. Test samples -MIC/EK-
    MIC: 1 / EK: 1
    (One test sample is acceptable for simultaneous application of EK and MIC.)
  3. Block diagram -MIC-
  4. User's manual -MIC/EK-
    (One test sample is acceptable for simultaneous application of EK and MIC.)
  5. Photos of products -MIC/EK-
    Photo is taken at an on-site laboratory. If disassembling the product is difficult, we may ask you to take photos.
  6. When the dealer in South Korea is the applicant ?MIC-
    Application Form (signature by representative or company seal is needed.)
    Copy of the certificate of business registration of sales representative in South Korea (resident registration number of the representative must be indicated)
  7. When manufacturer is applicant -MIC-
    Application Form (signature by representative or company seal is needed in the column for applicant's seal.)
    Authorization document of dealer in South Korea→Form is available
  8. Application for safety certification -EK-
    (written in English or Korean)
  9. Authorization of agent: Detail of entrusted service you request of us -EK-
  10. CB report/Factory Examination certificate -EK-
  11. Schematics (product body, power supply and high voltage: not necessary if included in the CB report.) -EK-
  12. Parts list (not necessary if included in the CB report) -EK-
  13. Label diagram ?MIC/EK-

Expense for Certification Acquisition

EMC: MIC Mark

JPY 380,000
This expense includes:

  • EMC test and safety test fee (at laboratory in South Korea)
  • Our support fee covering up to certification acquisition
  • A copy of the test report
  • Application service fee: 1 ID and 1 certificate

When the test results fail and you travel to the partner laboratory to use the test site

  • Usage fee for test facility: JPY 20,000/hr
Safety EK Mark

JPY 380,000 (where MIC certification and CB report are available)
This expense includes:

  • Safety & EMC testing fee (at laboratory in South Korea)
  • Our support fee covering up to certification acquisition
  • A copy of the test report
  • Application service fee: 1 ID and 1 certificate
  • Factory audit fee is not included (not necessary if confirmation note of factory examination is available.)
 

When the test results fail and you want, the service below will be provided

(only for MIC certification)

If it is easy to pass, you will receive solutions free of charge. If it is complicated, we ask you to witness or get a quote.

Application procedure

Please send the request form for EMC testing and EMC measures to our sales representative in charge of you. If you are not sure of the sales representative’s name, please contact the following. If you send samples to the specified address (local representative), customs clearance would be expedited, but if necessary, we can send them in place of you. In this case, extra transport costs will be charged to you.

Application Period

It takes about 2 weeks for MIC and about 30 days for EK from arrival of measuring equipment at the laboratory to obtain certification if all documents are prepared.

Go to inquire/estimate.
 
〒213-0023 神奈川県川崎市高津区子母口398番地 特定建設業の取得  許可番号: 神奈川県知事許可(特-24)第66858号
044-751-2316(営業部)